01
Control systems
Digital servo, flight control, autopilot, GNC, traction/propulsion, platform control and PWM controllers.
Indigenous product development, design-to-production capability, mission-critical electronics, high-reliability electro-mechanical systems, reusable platforms and lifecycle support.
Product architecture
Explore our product families and the detailed specifications available for selected products.
Digital servo, flight control, autopilot, GNC, traction/propulsion, platform control and PWM controllers.
High-reliability power supplies, converters, energy management, battery management, motor drives, distribution, switching supplies, inverters and rectifiers.
RF modules, telemetry/telecommand, software-defined radios, SATCOM, data links and secure communications.
Mission computers, flight-control computers, embedded design, FPGA/processor systems, data acquisition, HUMS, navigation, mission planning, GCS and cybersecurity software.
INS, GPS-based navigation, radar/sonar interfaces, EO/IR payloads and seeker electronics including signal processing and servo controller units.
Drone motors and ESCs, PRV-series high-performance motors/controllers, flight controllers and navigation modules.
High-performance servo motors, non-rare-earth PM motors, solenoid valves, magnetless motors, EV motors and precision actuators.
Rugged enclosures, locking/release mechanisms, aerospace structures, cooling systems and structural integration modules.
ATE, checkout systems, simulation, EMI/EMC test solutions and environmental test systems.
Product datasheet • PMSM
Part number SVT-PMSM-100V-24K-01N-A01-R0. Compact, high-speed PMSM designed for 100 V operation and high power density.
Tested up to 0.5 Nm and 722 W output. Four-pole, three-phase, low-inductance design supports fast current response and high power density.
| Parameter | Value |
|---|---|
| Overall length including shaft | 96.0 mm |
| Body length | 78.2 mm |
| Shaft diameter | Ø 8.0 mm |
| Mounting | 4 × M3, PCD Ø 22.2 mm |
| Weight | 275 g |
| Maximum tested torque | 0.5 Nm |
| Maximum tested current | 11.44 A |
| Continuous torque* | 0.10 Nm |
| Continuous current* | 2.29 A |
| Stall torque | 4.0 Nm |
| Parameter | Value |
|---|---|
| Rated supply voltage | 100 V |
| Terminal resistance (phase-to-phase) | 0.45 Ω |
| Terminal inductance (phase-to-phase) | 250 µH |
| Torque constant | 0.0455 Nm/A |
| Speed constant | 240 rpm/V |
| Electrical time constant | 0.556 ms |
| No-load current | 400 mA |
| Poles / phases | 4 poles / 3 phases |
| Torque | Speed | Current | Output power | Input power | Efficiency |
|---|---|---|---|---|---|
| 0.1 Nm | 20,375 rpm | 2.86 A | 213.4 W | 286 W | 74.6% |
| 0.2 Nm | 18,889 rpm | 4.32 A | 395.6 W | 432 W | 91.6% |
| 0.3 Nm | 17,310 rpm | 6.12 A | 543.8 W | 612 W | 88.9% |
| 0.4 Nm | 15,384 rpm | 8.76 A | 644.4 W | 876 W | 73.6% |
| 0.5 Nm | 13,787 rpm | 11.44 A | 721.9 W | 1,144 W | 63.1% |
*Continuous ratings are calculated at 20% of maximum tested values. Specifications may change; contact SkyVector to confirm the current configuration and operating limits.
Product datasheet • Angle sensing
Part number SVT-PCR-A30B14C08. Frameless, brushless rotary transformer that converts shaft angle into analogue sine/cosine voltages for compact assemblies.
Low-profile bonded stator and rotor pair supplied for integration into the customer’s housing and bearing system. Brushless, contactless construction has no wear parts and minimises axial length.
| Parameter | Value |
|---|---|
| Outer diameter | Ø 30.0 mm |
| Bore / inner diameter | Ø 14.3 mm |
| Stator stack height | 8.0 mm |
| Rotor engagement height | 3.8 mm |
| Weight | 22 g |
| Parameter | Specification |
|---|---|
| Stator primary input | 5.0 V rms ±5% |
| Excitation frequency | 2.0 kHz ±1.5% |
| Angular range | 360° |
| Transformation ratio | 1:1 ±5% |
| Phase shift at reference frequency | 25° max |
| Null / residual voltage | 15 mV max |
| Accuracy | ±3 arc-min |
| Primary excitation current | 70 mA max |
| Resolver speed | 1X single-speed |
Technical data is for information only and may change without prior notice. Confirm integration requirements and current specifications with SkyVector.
Custom product development
SkyVector also lists mission-critical electronics, reusable product platforms, qualification support and high-reliability electro-mechanical systems in its portfolio.